2位双向电平移位器
Automatic Sensing & Ultra Tiny Package
自动传感和超小型封装
Features
特征
VCCA can be Less than, Greater than or Equal to
VCCA可以小于、大于或等于
VCCB
VCCB
1.2V to 5.5V on A Port and 1.2V to 5.5V on B Port
1.2V至5.5V的一个港口和1.2V至5.5V的B Port
High−Speed with 20 Mb/s Data Rate for push-pull
高−速度和20 MB / s的数据速率为推挽
application
应用
High−Speed with 2 Mb/s Data Rate for open-drain
高−速度和2 MB / s的数据速率为漏极开路
application
应用
No Direction-Control Signal Needed
没有方向控制所需的信号
Low Bit-to-Bit Skew
低点位偏移
Non-preferential Power-up Sequencing
非优惠电顺序
ESD protection exceeds 8KV HBM per JESD22-
8kv HBM ESD保护超过每JESD22—
A114
A114
Integrated 10 kΩ Pull-up Resistors
集成10 KΩ上拉电
Package: UDFN1.2x1.6-8L and MSOP-8L
包装：udfn1.2x1.6-8l和msop-8l
Applications
应用
I
我
2C, SMBus, MDIO
2C、SMBus，MDIO
Low Voltage ASIC Level Translation
低电压ASIC的翻译
Mobile Phones, PDAs, Camera
手机、PDA、照相机
Description
描述
The PI4ULS5V202 is a 2-bit configurable dual
这是一个2位的可配置的双pi4uls5v202
supply bidirectional auto sensing translator that does not
供应双向自动传感翻译，不
require a directional control pin. The A and B ports are
需要定向控制销。A和B端口
designed to track two different power supply rails, VCCA
轨道设计的两个不同的电源轨，VCCA
and VCCB respectively. Both the VCCA and VCCB supply
和VCCB分别。无论是VCCA和VCCB供应
rails are configurable from 1.2V to 5.5V. This allows
导轨配置从1.2V到5.5V。这允许
voltage logic signals on the VCCA side to be translated
电压逻辑信号在VCCA侧要翻译
into lower, higher or equal value voltage logic signals on
到低，高或同等价值的电压逻辑信号
the VCCB side, and vice-versa.
VCCB侧，反之亦然。
The translator has integrated 10 kΩ pull-up resistors
译者综合10 KΩ上拉电阻
on the I/O lines. The integrated pull-up resistors are used
在I/O线路上。使用集成的上拉电阻
to pull-up the I/O lines to either VCCA or VCCB. The
向上拉的I / O线要么VCCA或VCCB。这个
PI4ULS5V202 is an excellent match for open-drain
pi4uls5v202是漏极开路的一个很好的匹配
applications such as the I2C communication bus.
应用如I2C通信总线。
请联系我们:
蔡晓玲 手机 15013430878
QQ 2450338923